IO Expansion Card
The 8 Input 2 Output Expansion Card provides easy expansion for an S1000 Controller. An additional 8 analog or digital inputs and 2 relay outputs can be added to the S1000 Controller baseboard. Up to 3 of these expansion cards can be installed on an S1000 Controller, expanding the input and output capacity of an S1000 to 32 inputs and 11 outputs.
2 Relay Outputs
Auxiliary power supply output
Auto card detection on S1000
Multi-state monitoring of digital inputs
4G/WIFI Cellular Expansion Card
The Cellular and WiFi Expansion Card allows for 3 options:
- 2G / 3G / 4G operation
- WiFi support for both end node and hotspot operation
- Dual-mode Cat M1/NB1 (NB-IoT) capability
All models support dual SIM for additional redundancy. A wide range of modulation is supported.
Automatic fall-back from 4G to 3G to GPRS
2G GPRS, 3G and 4G networks
Dual sim auto detecting best path
Supports LTE-CATM1 and NB-IoT network connectivity
Optional WiFi hotspot or device mode
Auto card detection on S1000
Supports GPS location
6 Output Expansion Card
The 6 Output Expansion Card provides an additional 6 dry contact relays, all with N/O and N/C terminals available. Up to 3 of these expansion cards can be installed on an S1000 Controller, expanding its output capacity to 20 relay outputs and 3 O/C outputs.
6 Relay outputs
N/O and N/C contacts
Auxiliary power supply output
Auto card detection on S1000
Supply selectable per relay common
Card Reader Interface
The Card Reader Interface Expansion Card provides additional control of up to 2 doors. It includes built-in dual Wiegand reader support for IN/OUT readers on the door and has 2 relay outputs. There is also 2 additional digital or analog inputs which are software configurable and can be used for break glass and door contact functions. Wiegand inputs can be software programmed to have a pullup resistor for situations where the Wiegand inputs are driven by a voltage.
Supports In/Out reader
Dual Wiegand support
Intelligent Door contact and Egress monitoring
Auto card detection on the S1000
Hot-swappable
Digital and analog inputs software configurable
Dual Ethernet Expansion Card
The Dual Ethernet Expansion Card provides additional Ethernet ports for the S1000 Controller using any of its 3 expansion slots.
10/100 TCP/IP ethernet port
Supports redundancy for S1000 panel to ARCO
2 Additional 10/100 ethernet ports
SSL/TLS encryption support
Auto card detection on S1000
Audio Converter
The Audio Converter Expansion Card is the interface to the Audio 4 Board. The Audio Converter allows digital audio to be captured and communicated to PACOM VIGIL CORE. It can also function as a standalone module with its built-in digital microphone, amplified microphone input and speaker output.